Franzen multi purpose doors

multi purpose door Franzen ISN-1 System Schröders

single-leaf internal door

Installation in internal walls

according to DIN ENV 14351-2 (draft)


combinable with additional performance characteristics
Thermal transmittance

UD-value ≥ 1.3 W/(m²K) according to EN ISO 10077-1

Air tightness
(optional)

up to class 4 according to EN 12207 (± 600 Pa)
expert opinion no. 11-000082-PR01

Resistance to wind load
(optional)

up to class C5 according to EN 12210 (± 2,000 Pa)
expert opinion no. 11-000082-PR01

Watertightness
(optional)

up to class 8A according to EN 12208 (+ 450 Pa)
expert opinion no. 11-000082-PR01

Resistance to positive and negative pressure
(optional)

according to DIN EN 12211 (up to 5,000 Pa)
expert opinion no. 16-003037-PR01

Behavior between different climates
(optional)

class 2 (d + e) according to EN 12219 (deflection)

Ability to release
(optional)

according to DIN EN 14351-1
proven for doors in escape and rescue routes

Flush with surface
(optional)

flush-mounted design FLAT

Explosion protection
(optional)
For installation in potentially explosive areas, please see confirmation letter Explosion protection ATEX for Franzen hinged doors (in German language) System Schröders (PDF) Logo ATEX
Potential equalisation
(optional)

according to DIN EN 50310, DIN VDE 0100-410 bzw. DIN VDE 0100-540


performance characteristics combinable with further Franzen door types:
Fire resistance
(optional)

T90 (fire door T90 Franzen TSN-11)
T30 (fire door T30 Franzen TSN-1)

according to. allgemeine bauaufsichtliche Zulassung (German approval)

Smoke control
(optional)

tested Sa4 / S200 (e.g. fire door Franzen TSN-1 CE)

according to EN 1634-3

Burglar resistance
(optional)

up to RC4 (z.B. burglar resistance door Franzen ESN-1)

according to DIN EN 1627 ff

Acoustic performance
(optional)

up to RW (C;Ctr) = 53 (-1;-5) dB (z.B. Schallschutztür Franzen SN-1)

according to EN ISO 10140-1 / EN ISO 10140-2 / EN ISO 717


Technical data
Dimensions
(rough building dimension)

Without specifications
Restrictions possible for additional performance characteristics

Overhead panel
  • optional with fixed overhead panel
Door leaf

leaf thickness 68 mm to 69 mm - smooth double-walled
plate thickness 1.0 mm to 1.5 mm

thin rebate design

securing pins

Frame

corner frame

frame-system "ZNG" with flush clipped in profile strips

  • optional enclosing frame
  • optional block frame

with elastic rubber seal
(seal type depending on performance characteristic)

Floor seal

depending on performance characteristic

  • without seal
  • lowerable floor seal
  • stop seal
Glass inset
(optional)

glass dimensions and -form variable

minimum frieze width: 90 mm

  • optional with intermediate glass inset bars
  • optional with port-hole
  • optional in overhead panel

glass inset bars with concealed screw connection (for rectangular glass inset)

Hinges

2/3-part KO door hinges
with patented easy-running bearings as easy running doors

  • optional door hinge with 3D adjustment
Fittings

various fittings possible

Locking

various locking systems possible

cylinder prepared (cylinder on-site)

Self-closing

door closer according to DIN EN 1154

  • optional spring hinge for smaller doors / flaps
  • optional hold-open system according to DIN EN 14637
Installation
  • in masonry
  • in concrete
  • in aerated concrete
  • in mounting walls
  • in encased steel columns
  • optional blunt installation in soffit
  • optional installation on the wall plate
Optional
  • additional safety devices possible
    (magnetic contact, bolt contact, e-opener...)
Optional
  • lock control
  • automated opening
  • motor locks ( also in 3-way locking)
  • powder coating in RAL colors
  • prison cell doors (special locking and food flap)
  • special solutions according to request and customer requirements

The information given refer to usual configurations. Subject to change without notice. No liability for incorrect information.

Individual configurations may be required when combining different performance characteristics.

Our team will be happy to assist you with the individual planning of your requirements.