Franzen burglar resistance doors

RC4 - classification report no. 22-16/04 ERW, PIV Velbert
RC3 - classification report no. 22-15/04 ERW, PIV Velbert
RC2 - classification report no. 45-47/22, PIV-Velbert
RC1 - classification report no. 212 24294, ift Rosenheim

according to EN 1627

Performance characteristics combinable with further Franzen door types:

up to R_W (C;C_tr) = 53 (-1;-5) dB

according to EN ISO 10140-1 / EN ISO 10140-2 / EN ISO 717

proof of airborne sound insulation for security doors
(measurement reports, test reports, expert opinions)

U_D-value ≥ 1.3 W/(m²K) according to EN ISO 10077-1

up to class 4 according to EN 12207 (up to 600 Pa)

according to DIN EN 14351-1 marked

up to class C5 (up to 2,000 Pa) according to EN 12210

up to class 8A according to EN 12208

up to 5.000 Pa according to DIN EN 12211

class 2 (d + e) according to EN 12219 (deflection)

proven for doors in escape and rescue routes

flush-mounted design FLAT

Performance characteristics combinable with further Franzen door types:

tested EI₂90 (fire door EI₂ 90 Franzen TSN-11)
tested EI₂60 (fire door EI₂90 Franzen TSN-3)
tested EI₂30 (fire door EI₂90 Franzen TSN-1)

according to EN 1634-1

T90 (fire door T90 Franzen TSN-11)
T30 (fire door T30 Franzen TSN-1)

mit allgemeiner bauaufsichtlicher Zulassung (German approval)

RS (e.g. smoke control door Franzen RSN-1)

according to DIN 18095

leaf thickness 68 mm to 69 mm - smooth double-walled
plate thickness 1.0 mm to 1.5 mm

• thin rebate design
  • optional thick rebate design
  • mineral wool filling (other fillings on request)
    • optional insulation inlet full-face glued and pressed with cover plate
      thus particularly plane and smooth door leaf

• frame-system "ZNG" with flush clipped in Thelesol® fire protection strips
• or
• frame-system "ZG"
• (see installation variants)

• corner frame
• optional enclosing frame
• optional block frame

with elastic rubber seal
(seal type depending on performance characteristic)

depending on performance characteristic

• without seal
• lowerable floor seal
• stop seal

• RC4: glass inset according to DIN EN 356 min. P6B
• RC3: glass inset according to DIN EN 356 min. P5A

glass dimensions and -form variable

minimum frieze width: 130 mm

• optional with intermediate glass inset bars

glass inset bars with concealed screw connection (for rectangular glass inset)

2/3-part KO door hinges
with patented easy-running bearings as easy running doors

• optional door hinge with 3D adjustment

• RC4: protection fitting DIN 18257 ES3
• RC3: protection fitting DIN 18257 ES2
• RC2 or RC1: protection fitting DIN 18257 ES1

• optional any approved handle set
• optional panic bar handle

• (optional NEMEF, BMH, HZ-Lock, Fliether, Dorma, eff eff)
• securing pins
• for panic lock with full-surface drilling protection

• optional panic lock (not for glass inset)
• for door height > 2,500 mm
  • triple locking
    (optional NEMEF, BMH, HZ-Lock, Fliether, Dorma, effeff)
  • securing pins

profile cylinder prepared (cylinder on-site)

door closer according to DIN EN 1154

• optional spring hinge for smaller doors / flaps
• optional hold-open device according to DIN EN 14637

• in masonry(thk ≥ 240 mm)
• in concrete(thk ≥ 140 mm)
• in aerated concrete(thk ≥ 150 mm)

• optional blunt installation in soffit
• optional installation on the wall plate

• additional safety devices possible
  (magnetic contact, bolt contact, e-opener...)

• lock control
• automated opening
• motor locks ( also in 3-way locking)
• powder coating in RAL colors
• prison cell doors (special locking and food flap)
• special solutions according to request and customer requirements