Franzen multi purpose steel doors

Combinable with additional performance characteristics:

up to class 3 according to EN 12207 (up to 600 Pa)

U_D-value ≥ 1.2 W/(m²K) according to EN ISO 10077-1

up to class C4 (up to 2,000 Pa) according to EN 12210

up to class 3A according to EN 12208

up to 3.800 Pa according to DIN EN 12211

class 2 (d + e) according to EN 12219 (deflection)

proven for doors in escape and rescue routes

flush-mounted design FLAT

Performance characteristics combinable with further Franzen door types:

T90 (fire door T90 Franzen TSN-12)
T30 (fire door T30 Franzen TSN-2)

mit allgemeiner bauaufsichtlicher Zulassung (German approval)

tested S_a / S₂₀₀ (z.B. fire door Franzen TSN-2)

according to EN 1634-3

up to RC4 (e.g. burglar resistance dor Franzen ESN-2)

according to EN 1627

up to R_W (C;C_tr) = 48 (-1;-5) dB e.g. acoustic performance door Franzen SN-2

according to EN ISO 10140-1 / EN ISO 10140-2 / EN ISO 717

• optional with fixed overhead panel

leaf thickness 68 mm to 69 mm - smooth double-walled
plate thickness 1.0 mm to 1.5 mm

• thin rebate design
  • optional thick rebate design

• frame-system "ZNG" with flush clipped in profile strips
• or
• frame-system "ZG"
• (see installation variants)

• corner frame
• optional enclosing frame
• optional block frame

with elastic rubber seal
(seal type depending on performance characteristic)

required for smoke control, acoustic performance, air tightness

• optional lowerable floor seal or
• sliding seal
• stop seal

glass dimensions and -form variable

minimum frieze width: 90 mm

• optional with intermediate glass inset bars
• optional with port-hole
• optional in overhead panel

glass inset bars with concealed screw connection (for rectangular glass inset)

per leaf 2/3-part KO door hinges
with patented easy-running bearings as easy running doors

• optional door hinge with 3D adjustment

various fittings possible

various locking systems possible

profile cylinder prepared (cylinder on-site)

both leafs with door closer according to DIN EN 1154 resp. EN 1155
with door closing sequence control according to EN1158

• in masonry
• in concrete
• in aerated concrete
• in mounting walls
• in encased steel columns

• optional blunt installation in soffit
• optional installation on the wall plate

marking only possible after publication of the standard DIN EN 14351-2

• lock control
• automated opening
• motor locks ( also in 3-way locking)
• powder coating in RAL colors
• prison cell doors (special locking and food flap)
• special solutions according to request and customer requirements