Franzen burglar resistance doors

Double-leaf burglar resistance door ESN-2 according to DIN EN 1627 ff

Franzen burglar resistance door ESN-2 "System Schröders"
Double-leaf burglar resistance steel door
	marked
Burglar resistance	RC4 - classification report no. 22-18/04 ERW, PIV Velbert RC3 - classification report no. 22-17/04 ERW, PIV Velbert RC2 - classification report no. 212 24303, ift Rosenheim RC1 - classification report no. 212 24302, ift Rosenheim according to EN 1627
Combinable with additional performance characteristics:
Acoustic performance (optional)	up to R_W (C;C_tr) = 48 (-1;-5) dB according to EN ISO 10140-1 / EN ISO 10140-2 / EN ISO 717 proof of airborne sound insulation for security doors (measurement reports, test reports, expert opinions)
Thermal transmittance (optional)	U_D-value ≥ 1.2 W/(m²K) according to EN ISO 10077-1
Air tightness (optional)	up to class 3 according to EN 12207 (up to 600 Pa) expert opinion no. 40-40/12.120, PIV Velbert
Installation in external walls (optional)	according to DIN EN 14351-1 marked
Resistance to wind load (optional)	up to class C4 (up to 2,000 Pa) according to EN 12210 expert opinion no. 40-40/12.120, PIV Velbert
Watertightness (optional)	up to class 3A according to EN 12208 expert opinion no. 40-40/12.120, PIV Velbert
Resistance to positive and negative pressure (optional)	up to 3.800 Pa according to DIN EN 12211 expert opinion no. 40-52/16.120
Behavior between different climates (optional)	class 2 (d + e) according to EN 12219 (deflection)
Ability to release (optional)	according to DIN EN 14351-1 proven for doors in escape and rescue routes
Flush with surface (optional)	flush-mounted design FLAT
Explosion protection (optional)	For installation in potentially explosive areas, please see confirmation letter Explosion protection ATEX for Franzen hinged doors (in German language) System Schröders (PDF)
Performance characteristics combinable with further Franzen door types:
Fire resistance (optional)	tested EI₂90 (fire door EI₂90 Franzen TSN-12) tested EI₂60 (fire door EI₂60 Franzen TSN-4) tested EI₂30 (fire door EI₂30 Franzen TSN-2) according to EN 1634-1 T90 (fire door T90 Franzen TSN-12) T30 (fire door T30 Franzen TSN-2) mit allgemeiner bauaufsichtlicher Zulassung (German approval)
Smoke control (optional)	RS (e.g. smoke control door Franzen RSN-2) according to DIN 18095

Technical data

Dimensions
(rough building dimension)

width	from 1,050 mm	up to 3,250 mm
height	from 1,750 mm	up to 3,000 mm

Door leaf

leaf thickness 68 mm to 69 mm - smooth double-walled
plate thickness 1.0 mm to 1.5 mm

thin rebate design
- optional thick rebate design
- mineral wool filling (other fillings on request)
  - optional insulation inlet full-face glued and pressed with cover plate
    thus particularly plane and smooth door leaf

Frame

frame-system "ZNG" with flush clipped in profile strips
or
frame-system "ZG"
(see installation variants)

corner frame
optional enclosing frame
optional block frame

with elastic rubber seal
(seal type depending on performance characteristic)

Rebate protection

rebate protection through ESP safety profile (patent-protected)

Floor seal

depending on performance characteristic

without seal
lowerable floor seal
stop seal

Glass inset
(optional)

RC4: glass inset according to DIN EN 356 min. P6B
RC3: glass inset according to DIN EN 356 min. P5A

glass dimensions and -form variable

minimum frieze width: 130 mm

optional with intermediate glass inset bars

glass inset bars with concealed screw connection (for rectangular glass inset)

Hinges

per leaf 2/3-part KO door hinges
with patented easy-running bearings as easy running doors

optional door hinge with 3D adjustment

Fittings

RC4: protection fitting DIN 18257 ES3
RC3: protection fitting DIN 18257 ES2
RC2 or RC1: protection fitting DIN 18257 ES1

optional any approved handle set
optional panic bar handle

Locking

active leaf profile cylinder prepared (cylinder on-site)
RC4:	triple locking
	(optional NEMEF, BMH, HZ-Lock, Fliether, Dorma, eff eff) securing pins for panic lock with full-surface drilling protection
RC3:	single locking with drop-in lock min. DIN 18 251 class 3
	optional panic locking (not for glass inset)
	for door height > 2,500 mm
	triple locking
	(optional NEMEF, BMH, HZ-Lock, Fliether, Dorma, effeff) securing pins
fixed leaf
RC3 / RC4:	rebate shoot bolt (shoot bolt lock) with locking upwards and downwards securing pins

Installation

in masonry(thk ≥ 240 mm)
in concrete(thk ≥ 140 mm)
in aerated concrete(thk ≥ 150 mm)
in steel frame / steel container

optional blunt installation in soffit
optional installation on the wall plate

Optional

lock control
automated opening
motor locks ( also in 3-way locking)
powder coating in RAL colors
prison cell doors (special locking and food flap)
special solutions according to request and customer requirements

The information given refers to the usual configurations. Individual configurations may be required when combining different performance characteristics.

Our team will be happy to assist you with the individual planning of your requirements.

Franzen ESN-2double-leaf burglar resistance door"System Schröders"

ESN-2 Downloads

Brochure (pdf)
classification reports
Technical drawing
- pdf
- dxf
Installation instruction

Franzen burglar resistance doors

Double-leaf burglar resistance door ESN-2 according to DIN EN 1627 ff

Combinable with additional performance characteristics:

Performance characteristics combinable with further Franzen door types:

ESN-2 Downloads