Franzen - External doors

marked

U_D-value ≥ 1.3 W/(m²K) according to EN ISO 10077-1

Combinable with additional performance characteristics:

up to class 4 according to EN 12207 (up to 600 Pa)

up to class C5 (up to 2,000 Pa) according to EN 12210

up to class 8A according to EN 12208

up to 5.000 Pa according to DIN EN 12211

class 2 (d + e) according to EN 12219 (deflection)

proven for doors in escape and rescue routes

flush-mounted design FLAT

Performance characteristics combinable with further Franzen door types:

tested EI₂90 (fire door EI₂90 Franzen TSN-11)
tested EI₂60 (fire door EI₂60 Franzen TSN-3)
tested EI₂30 (fire door EI₂30 Franzen TSN-1)

according to EN 1634-1

tested S_a / S₂₀₀ (e.g. fire door Franzen TSN-1 CE)

according to EN 1634-3

up to RC4 (z.B. burglar resistance door Franzen ESN-1)

according to DIN EN 1627 ff

up to R_W (C;C_tr) = 53 (-1;-5) dB (z.B. Schallschutztür Franzen SN-1)

according to EN ISO 10140-1 / EN ISO 10140-2 / EN ISO 717

• optional with fixed overhead panel

leaf thickness 68 mm to 69 mm - smooth double-walled
plate thickness 1.0 mm to 1.5 mm

• thin rebate design
  • optional thick rebate design

• frame-system "ZNG" with flush clipped in profile strips
• or
• frame-system "ZG"
• (see installation variants)

• corner frame
• optional enclosing frame
• optional block frame

with elastic rubber seal
(seal type depending on performance characteristic)

required for smoke control, acoustic performance, air tightness

• optional lowerable floor seal or
• sliding seal
• stop seal

glass dimensions and -form variable

minimum frieze width: 90 mm

• optional with intermediate glass inset bars
• optional with port-hole
• optional in overhead panel

glass inset bars with concealed screw connection (for rectangular glass inset)

2/3-part KO door hinges
with patented easy-running bearings as easy running doors

• optional door hinge with 3D adjustment

various fittings possible

various locking systems possible
profile cylinder prepared (cylinder on-site)

door closer according to DIN EN 1154

• optional spring hinge for smaller doors / flaps
• optional hold-open system according to DIN EN 14637

• in masonry
• in concrete
• in aerated concrete
• in mounting walls
• in encased steel columns

• optional blunt installation in soffit
• optional installation on the wall plate

marking according 14351-1

• additional safety devices possible
  (magnetic contact, bolt contact, e-opener...)

• lock control
• automated opening
• motor locks ( also in 3-way locking)
• powder coating in RAL colors
• prison cell doors (special locking and food flap)
• special solutions according to request and customer requirements