|
single leaf bullet resistance door |
||||||
|
|
|||||||
| Bullet resistance |
class FB6 - test report S-23-0208-04/05 Beschussamt Ulm tested according to EN 1522/1523 |
||||||
| combinable with additional performance characteristics | |||||||
|---|---|---|---|---|---|---|---|
|
Thermal transmittance
(optional) |
UD-value ≥ 2,7 W/(m²K) according to EN ISO 10077-1 |
||||||
| Burglar resistance
(optional) |
RC4 - classification report no. 22-5/15.119, PIV-Velbert
according to DIN EN 1627 ff |
||||||
| Acoustic performance
(optional) |
up to RW (C;Ctr) = 53 (-1;-5) dB according to EN ISO 10140-1 / EN ISO 10140-2 / EN ISO 717 |
||||||
| Air tightness
(optional) |
up to class 4 according to EN 12207 (± 600 Pa) |
||||||
| Resistance to wind load
(optional) |
up to class C5 according to EN 12210 (± 2,000 Pa) |
||||||
| Watertightness
(optional) |
up to class 8A according to EN 12208 (+ 450 Pa) |
||||||
| Resistance to positive and negative pressure
(optional) |
according to DIN EN 12211 (up to 5,000 Pa) |
||||||
| Behavior between different climates
(optional) |
class 2 (d + e) according to EN 12219 (deflection) |
||||||
| Ability to release
(optional) |
according to DIN EN 16034
according to DIN EN 14351-1 |
||||||
| Flush with surface
(optional) |
|||||||
| Explosion protection
(optional) |
For installation in potentially explosive areas, please see confirmation letter Explosion protection ATEX for Franzen hinged doors (in German language) System Schröders (PDF)
|
||||||
| Potential equalisation
(optional) |
according to DIN EN 50310, DIN VDE 0100-410 bzw. DIN VDE 0100-540 |
||||||
| Technical data | |||||||
|
Dimensions
(rough building dimension) |
|
||||||
| Door leaf |
leaf thickness 69 mm - smooth double-walled
thin rebate design securing pins |
||||||
| Frame |
corner frame frame-system "ZNG"seal depending on the performance characteristic
|
||||||
| threshold |
with bullet-resistant threshold Doors without a bullet-resistant threshold always represent a safety risk, as a projectile can pass through the lower door gap. |
||||||
| Bodendichtung |
depending on the performance characteristic
|
||||||
| Glass inset
(optional) |
glass dimensions variable minimum frieze width: 130 mm glass inset bars with concealed screw connection (for rectangular glass inset) |
||||||
| Hinges |
2/3-part KO door hinges
|
||||||
| Fittings |
ES3 fittings
|
||||||
| Locking |
various locking systems possible |
||||||
| Self-closing |
door closer according to DIN EN 1154 |
||||||
| Installation |
proven with mortared corner frame / attachment frame
|
||||||
| Optional |
|
||||||
|
The information given refer to usual configurations. Subject to change without notice. No liability for incorrect information. Individual configurations may be required when combining different performance characteristics. Our team will be happy to assist you with the individual planning of your requirements. |
|||||||
marked with declaration of performance
